By worf - Sun Dec 03, 2023 8:14 pm
- Sun Dec 03, 2023 8:14 pm
#245830
Measuring thrice required to make sure the first cut doesn’t cut too much.
Also, best remove the front cover for this. Much easer to get to that stuff for fettling.
PorKen wrote: ↑Sun Dec 03, 2023 6:48 pm I plan on making brackets to hold the 'wishbone' carrier, ditching everything else. Unfortunately, there are not many mounting points inside the fender, using existing bolt holes.Take the two outer sections of the lifter bar, chop-off the ends that protrude into the engine bay, weld a plate to the shortened sections that’s the same shape as the plastic bearing, and then use the holes for that bearing in the chassis to bolt the welded section in place.
Measuring thrice required to make sure the first cut doesn’t cut too much.
Also, best remove the front cover for this. Much easer to get to that stuff for fettling.
Hanlon’s Razor: Never attribute to malice that which is adequately explained by stupidity.
Heinlein’s Corollary: Never underestimate the power of human stupidity.
The Reddit Conjecture: Sufficiently advanced stupidity is indistinguishable from malice.
Worf’s Razor: Never attribute to stupidity that which is adequately explained by laziness.
Worf’s Identity: Sufficiently advanced laziness is indistinguishable from stupidity
Worf's Law: Once you've mitigated risk from stupidity and laziness in your endeavors, failure is usually the result of insufficient imagination.
My 928 Inspection Guide
Heinlein’s Corollary: Never underestimate the power of human stupidity.
The Reddit Conjecture: Sufficiently advanced stupidity is indistinguishable from malice.
Worf’s Razor: Never attribute to stupidity that which is adequately explained by laziness.
Worf’s Identity: Sufficiently advanced laziness is indistinguishable from stupidity
Worf's Law: Once you've mitigated risk from stupidity and laziness in your endeavors, failure is usually the result of insufficient imagination.
My 928 Inspection Guide