Open Road

Posted: **Fri Jun 17, 2022 3:43 pm**

a first attempt at a replica of a 92862404900, a protection plate that fits behind the tail gate opening motor, i guess to stop potential damage to it or the warning triangle itself when the warning triangle is removed/ refitted.
its NLA from Porsche.
genuine Porsche one on the left, mine on the right, just need to get the indentations deeper on the next one, then stick a few on ebay, should sell like hot cakes...
cheers
Phil

Posted: **Sun Jun 19, 2022 3:06 am**

Think I can show this without being called a copy cat by someone.
Åke

Posted: **Sun Jun 19, 2022 5:13 am**

Strosek Ultra wrote:Think I can show this without being called a copy cat by someone.
Åke

plenty of knowledge without the ego's = a far more easy going forum in my opinion

Posted: **Sun Jun 19, 2022 1:31 pm**

Posted: **Sat Jul 09, 2022 6:57 am**

innards of an in tank fuel pump

Posted: **Sat Jul 09, 2022 10:44 am**

Strosek Ultra wrote: ↑Sun Jun 19, 2022 3:06 am Think I can show this without being called a copy cat by someone.

Nice. What are you doing for a pickup tube spacer.

Edit: Forgot picture…

(Oh, BTW, if you want to post a bunch of pictures, this site’s thread navigation and pagination work better when it’s one to three pictures per post.)

Posted: **Sun Jul 10, 2022 10:02 am**

More speed, more brake.
GTS calipers from Kevin.

Posted: **Wed Jul 13, 2022 4:48 pm**

Once a year wheel well cleaning today!

Posted: **Wed Jul 13, 2022 8:36 pm**

Posted: **Thu Jul 14, 2022 2:56 pm**

Crumpler wrote:

water cooled intercooler?

Posted: **Thu Jul 14, 2022 9:59 pm**

Bingo Phil :)

It’s a small core but the only place I could get an intercooler to fit. The centrifugal SC was heat soaking badly.

Posted: **Thu Jul 14, 2022 10:56 pm**

Posted: **Fri Jul 15, 2022 11:21 am**

XR4Tim wrote: ↑Thu Jul 14, 2022 10:56 pm ... pic ...

NOS right-side parcel shelf?

Posted: **Fri Jul 15, 2022 9:29 pm**

worf wrote: ↑Fri Jul 15, 2022 11:21 am
XR4Tim wrote: ↑Thu Jul 14, 2022 10:56 pm ... pic ...
NOS right-side parcel shelf?

Yes!

Posted: **Wed Jul 27, 2022 6:35 am**

From this year PVGP,

Posted: **Mon Aug 01, 2022 11:20 pm**

Quiz:

Posted: **Tue Aug 02, 2022 3:19 pm**

no need to get the apprentice to try and make some out of a cut off bolt head, i have a few spare if you need any

other than that i am out of ideas

cheers
Phil

Posted: **Tue Aug 02, 2022 5:09 pm**

“Flappy valve” stop

Posted: **Tue Aug 02, 2022 5:20 pm**

Posted: **Thu Aug 04, 2022 7:54 pm**

@Rdon Your picture: $1000 of pain.

Rdon wrote: ↑Tue Aug 02, 2022 5:09 pm “Flappy valve” stop

Correct!

Posted: **Fri Aug 05, 2022 7:44 am**

worf wrote: ↑Thu Aug 04, 2022 7:54 pm @Rdon Your picture: $1000 of pain.

Fortunately, the pump is operational. Removed it specifically to check for a broken hose and was not disappointed. No drama with the threaded insert, replacement hose and clamps installed and now, theoretically, one less thing that could leave me on the side of the road.

Posted: **Sat Aug 27, 2022 4:28 am**

Things does not always go well. In this case fabricating a new wrist pin bushing is all what was needed except for a new wrist pin.
Åke

Posted: **Sat Aug 27, 2022 7:35 am**

Strosek Ultra wrote:
Things does not always go well. In this case fabricating a new wrist pin bushing is all what was needed except for a new wrist pin.
Åke[/quote

interested to know more about what happened to that wrist pin
cheers
Phil

Posted: **Sun Aug 28, 2022 3:41 am**

These photos are not allowed to be shown by you know who.
Åke

Posted: **Sun Aug 28, 2022 4:42 am**

/\ /\ /\ /\
so i guess he's not perfect after all
cheers
Phil

Posted: **Sun Aug 28, 2022 6:51 am**

h2pmr wrote: ↑Sun Aug 28, 2022 4:42 am /\ /\ /\ /\
so i guess he's not perfect after all
cheers
Phil

Nobody is perfect. I do not know how involved he was in this disaster.
You can read more here (page 7).
https://www.corner-carvers.com/forums/s ... ing-thread
Åke

Posted: **Sun Aug 28, 2022 12:07 pm**

Strosek Ultra wrote:
h2pmr wrote: ↑Sun Aug 28, 2022 4:42 am /\ /\ /\ /\
so i guess he's not perfect after all
cheers
Phil
Nobody is perfect. I do not know how involved he was in this disaster.
You can read more here (page 7).
https://www.corner-carvers.com/forums/s ... ing-thread
Åke

thanks for the thread link, i thought it was a recent, road car engine failure but still sadly 1 less useable engine block in the world.
cheers
Phil

Posted: **Sat Sep 03, 2022 3:28 am**

Strosek cars.
Åke

Posted: **Sat Sep 03, 2022 5:53 am**

Finally finished painting the three white garage doors.
Åke

Posted: **Sat Sep 03, 2022 9:54 am**

image.png

Posted: **Sat Sep 03, 2022 3:03 pm**

before i get my micrometer out, does anybody know what size bearing or generic part number of it, that fits in the A/C compressor front pulley?
compressor is the 80-89 version.
cheers
Phil

Posted: **Sun Sep 04, 2022 3:25 am**

image.png

This bearing is a double row angular contact ball bearing. This bearing is usually used in AC compressor / compressors on vehicles, where by the additional names as AC bearing and Kompressor bearing.
FULL DESIGNATION: AC 35x55x20
( d ) INNER DIAMETER: 35 mm
( D ) OUTER DIAMETER: 55 mm
( B ) WIDTH: 20 mm
Åke

Posted: **Sun Sep 04, 2022 4:07 am**

Strosek Ultra wrote:
image.png
This bearing is a double row angular contact ball bearing. This bearing is usually used in AC compressor / compressors on vehicles, where by the additional names as AC bearing and Kompressor bearing.
FULL DESIGNATION: AC 35x55x20
( d ) INNER DIAMETER: 35 mm
( D ) OUTER DIAMETER: 55 mm
( B ) WIDTH: 20 mm
Åke

perfect, many thanks Ake

Posted: **Mon Sep 05, 2022 5:27 am**

Strosek cars are out and about.
The old man with the walker is not a Porsche owner.
Åke

Posted: **Sat Sep 10, 2022 10:45 am**

Strosek Ultra wrote: This bearing is a double row angular contact ball bearing. This bearing is usually used in AC compressor / compressors on vehicles, where by the additional names as AC bearing and Kompressor bearing.
FULL DESIGNATION: AC 35x55x20
( d ) INNER DIAMETER: 35 mm
( D ) OUTER DIAMETER: 55 mm
( B ) WIDTH: 20 mm
Åke

sadly the 80-89 A/C compressor use a bearing 40 x 62 x 24, not quite as easy to find though

Posted: **Sat Sep 10, 2022 1:21 pm**

i think part number of the bearing is 40BG62020-2DLCS, will order 1 and see if it fits.
cheers
Phil

Posted: **Sat Sep 10, 2022 6:04 pm**

A 928 meet today in Montréal.
Thanks Andy!
A lot of fun with great owners.
And two very special guests!

Posted: **Sat Sep 10, 2022 9:36 pm**

Posted: **Sun Sep 11, 2022 2:55 am**

h2pmr wrote: ↑Sat Sep 10, 2022 1:21 pm i think part number of the bearing is 40BG62020-2DLCS, will order 1 and see if it fits.
cheers
Phil

The bearing you need is called 40BD219.
Can be found on Ebay or here https://www.bearingwholesalelots.com/40 ... on-com.htm
The bearing you mentioned is 20,6mm wide.
Åke
https://www.ebay.com/itm/192305821780?h ... BMhJDStOVg

image.png

Posted: **Sun Sep 11, 2022 11:11 am**

Strosek Ultra wrote:
h2pmr wrote: ↑Sat Sep 10, 2022 1:21 pm i think part number of the bearing is 40BG62020-2DLCS, will order 1 and see if it fits.
cheers
Phil
The bearing you need is called 40BD219.
Can be found on Ebay or here https://www.bearingwholesalelots.com/40 ... on-com.htm
The bearing you mentioned is 20,6mm wide.
Åke
https://www.ebay.com/itm/192305821780?h ... BMhJDStOVg
image.png

ah yes, managed to cancel that one and get one the correct size, thank you Ake.

Posted: **Mon Sep 12, 2022 2:06 pm**

30 sets are ready to ship. Sorry for the wait boys and girls.

image.png

Posted: **Sat Sep 17, 2022 6:54 am**

Strosek Ultra wrote:
h2pmr wrote: ↑Sat Sep 10, 2022 1:21 pm i think part number of the bearing is 40BG62020-2DLCS, will order 1 and see if it fits.
cheers
Phil
The bearing you need is called 40BD219.
Can be found on Ebay or here https://www.bearingwholesalelots.com/40 ... on-com.htm
The bearing you mentioned is 20,6mm wide.
Åke
https://www.ebay.com/itm/192305821780?h ... BMhJDStOVg

fitted the bearing yesterday and fits like a glove, many thanks.

Posted: **Sun Sep 18, 2022 2:58 pm**

lack of use in the UK

Posted: **Sun Sep 18, 2022 3:00 pm**

N/A to auto owners

Posted: **Sun Sep 18, 2022 3:13 pm**

more slightly unsafe corrosion

Posted: **Mon Sep 19, 2022 12:35 am**

Stay in your grove you mutha!@#$ing gasket!

When you get a cam cover gasket that was rolled into a little ball for shipping:

Posted: **Tue Sep 20, 2022 6:04 pm**

Posted: **Mon Sep 26, 2022 1:20 pm**

Porsche meet at Tjällmo, Sweden.
Åke

Posted: **Mon Sep 26, 2022 1:27 pm**

928 Frenzy. Last Saturday.

Posted: **Mon Sep 26, 2022 1:28 pm**

image.png

Open Road

The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread

Re: The 928 Photo Thread