Open Road

With so many parts becoming NLA or prohibitively expensive, 3D printing has come to save the day!

If you have been able to model a part and would like to share it with the community here is where you should post it.

Please avoid posting anything with an existing copyright as the purpose of this is to post original files not available elsewhere.

Ask any questions if unsure.

996/997 Lower Control Arm Bushing Puller


Spacer for 996 GT2 Chimney ducting


996 GT2 Bumper Spacer

TheDeckMan wrote: ↑Tue Aug 24, 2021 12:21 pm 996/997 Lower Control Arm Bushing Puller


Spacer for 996 GT2 Chimney ducting


996 GT2 Bumper Spacer

Appreciate the contribution!

I went ahead and split these up as it would be more beneficial to keep them separately archived and also able to keep discussion specific to the part itself. Thanks!

Great point! Happy to help. I often make a lot of drawings for stuff I make for my cars so happy to share. Some of them I keep because of selling some of these items but if someone wants to have a go and make their own they are more than welcome.

Is there a way to upload .stl files here or will we only be able to post a link to the file?

Thanks for the forum add!

sh944 wrote: ↑Sun Aug 29, 2021 7:04 pm Is there a way to upload .stl files here or will we only be able to post a link to the file?

Thanks for the forum add!

If you select "Upload Attachment" below the main dialog window when typing your post, you'll be able to add STL, OBJ, AMF, and 3MF files directly to your message.

Note that there is a 32 meg limit per attachment so if necessary it can be zipped and uploaded that way instead. I don't think these files get that big so we should be ok.

Let me know if any questions!