[maddog2020]

The barrel connectors are. Coming apart in a lot of cars. I found a triple sealed 6 pin twist lock connector that will fit inside the barrel connector clamp out of sight for those that are looking for a good quality connector.



Connectors are about $8 each side
Pins are about $1 each for good quality gold pins.
Total cost is about $30 per connector .

They are pretty nice pieces and I’m using them in a couple of places for my new ECU installation.

They are available @ mouser.com

[worf]

Nice!

The deterioration of the connectors on the ABS/BPW/RDK harness is going to become a pandemic in this coming decade.

It kinda sucks though that one has to modify 2 or 3 senders in the wells and 2 or 3 connectors at the other end for each wheel well to make any alternative connector work.

But, it is what it is.

[maddog2020]

I'm tempted to make my own ABS harnesses, and modify the ABS sensors and the brake pad sensors to these. When it's time to replace a brake pad sensor just de pin and re pin the new one.

[ROG100]

Two companies are working on making new connectors and complete ABS harnesses. Soon we will have replacements. The hardest part was the connector.

[maddog2020]

Two companies are working on making new connectors and complete ABS harnesses. Soon we will have replacements. The hardest part was the connector.

That is great to hear~!

[worf]

Two companies are working on making new connectors and complete ABS harnesses. Soon we will have replacements. The hardest part was the connector.

Keep us informed!