8 cylinder front engine iconic vehicle
  • User avatar
  • User avatar
  • User avatar
  • User avatar
  • User avatar
User avatar
By milrad
#92852
Anyone know the proper length for the vac hose running from the flappy actuator to the flappy solenoid? 89GT. I'm making up new lines and somehow along the way in this project this vac hose went missing.

Thanks!
User avatar
By Geza-aka-Zombo
#92857
Can't you just add 10" to half the manifold length, and cut to final size later?
User avatar
By worf
#92860
Geza-aka-Zombo wrote: Tue Jul 20, 2021 10:32 pm Can't you just add 10" to half the manifold length, and cut to final size later?
This -^. 18” will be way to long (enough.) Install manifold and cut to length.
User avatar
By milrad
#92861
Well that would be too obvious :roflmao:

Actually I'm working off Roger's kit and retrofitting to stock a modified vac system as I update my SC setup. I'm trying to be economical so I don't need to wait for more hose. Mostly I just prefer to do things right the first time and be done. Your way is probably better...
User avatar
By h2pmr
#93541
this long
You do not have the required permissions to view the files attached to this post.
User avatar
By worf
#93559
That right-hand drive stuff is weird… :tongue:

Left-hand drive vac line from the changeover valve to the resonance flap vacuum actuator is about 10” long and the actuator is very different.

This upcoming DFW First Saturday Breakfast will be[…]

Looks like I have one tracked down. Thanks guys[…]

78 in Fort worth

I have not seen that car before. I am familiar wi[…]

Wonderful. I don't think there are many critical d[…]