Forum layout is now fixed. If it hasn't reverted back to original form for you, delete your browser cache and you should see it fixed.
8 cylinder front engine iconic vehicle
  • User avatar
  • User avatar
  • User avatar
  • User avatar
  • User avatar
  • User avatar
  • User avatar
By chalkboss
Registration Days Posts
#88126
Someone before me broke the plug that goes into the TB cover and connects to the pin. So I have a very (now) short wire in one hand and a bare useless barrel or pin connector in the other (don't know the proper name). Roger has nothing; I cant find anything local. Should I just order a barrel connector online? Any advice?

Thanks
By worf
Registration Days Posts Custom
#88149
chalkboss wrote: Mon Jun 28, 2021 12:42 pm Someone before me broke the plug that goes into the TB cover and connects to the pin. So I have a very (now) short wire in one hand and a bare useless barrel or pin connector in the other (don't know the proper name). Roger has nothing; I cant find anything local. Should I just order a barrel connector online? Any advice?
AFAIK, everything you might need is available. Post a picture of exactly what’s broken so I can point you in the right direction.
By chalkboss
Registration Days Posts
#88155
This is the wire that's broke. It has no plug (circled in red) any longer.

Not my pic, Dwayne's is much better.
Image
By SeanR
Registration Days Posts Custom
#88164
Engine side plug and grommet are available, the car side plug has been NLA for a long time. There were a bunch in the states back when Roger announced I was making harnesses and the next week all of them were purchased and it went NLA. So someone has them but isn't saying so.
By worf
Registration Days Posts Custom
#88196
SeanR wrote: Mon Jun 28, 2021 1:59 pm ... the car side plug has been NLA for a long time. There were a bunch in the states back when...
@chalkboss

Kroon is making LH harnesses. So, they have to have them. I could have *sworn* I ran across this connector randomly in the past month.

I'd contact them (Kroon) and ask for info or if they'll sell the connector bits. They have been helpful to me in the past when trying to find connectors.

In particular, they pointed me at the 2- and 3-pin connectors for the O2 sensor, PSD, EGTs, etc. I was able to order a pile of them from the manufacturers' US rep.
SeanR liked this
By maddog2020
Registration Days Posts
#88218
I purchased a new firewall boot from Kroon for the engine harness. Exact reproduction of the factory boot. If they can't find it, they have it made. Not cheap but they have high standards for quality.
By ChrisZ
Registration Days Posts
#88594
Hm. How difficult might it be to print up a part? I'm finding this 3D printer to be damn useful.....
By linderpat
Registration Days Posts Custom
#88981
I saved mine from my old windshield, since Roger told me that they are nla and the same part as the timing belt warning plug.
By chalkboss
Registration Days Posts
#92959
Finally wrapped this up. Got one from Greg Brown, he sometimes has them (off windshields as mentioned above). Can't believe this was so hard to find :banghead:

My thoughts on Miami race are (I think..) similar […]

Refurbishing D90 Wheels

Those wheels are Pirelli P Slots, OEM on certain 8[…]

my #3 restoration thread

had a look at it this morning Dave, and when i had[…]

Racing garments

Let me call my son ~ you can never have too many […]