Forum layout is now fixed. If it hasn't reverted back to original form for you, delete your browser cache and you should see it fixed.
8 cylinder front engine iconic vehicle
  • User avatar
  • User avatar
  • User avatar
  • User avatar
  • User avatar
  • User avatar
  • User avatar
  • User avatar
By h2pmr
Registration Days Posts
#155787
a first attempt at a replica of a 92862404900, a protection plate that fits behind the tail gate opening motor, i guess to stop potential damage to it or the warning triangle itself when the warning triangle is removed/ refitted.
its NLA from Porsche.
genuine Porsche one on the left, mine on the right, just need to get the indentations deeper on the next one, then stick a few on ebay, should sell like hot cakes...
cheers
Phil
You do not have the required permissions to view the files attached to this post.
worf liked this
By h2pmr
Registration Days Posts
#156044
Strosek Ultra wrote:Think I can show this without being called a copy cat by someone.
Åke
plenty of knowledge without the ego's = a far more easy going forum in my opinion :thumbup:
You do not have the required permissions to view the files attached to this post.
Strosek Ultra liked this
By h2pmr
Registration Days Posts
#159739
innards of an in tank fuel pump
You do not have the required permissions to view the files attached to this post.
By worf
Registration Days Posts Custom
#159756
Strosek Ultra wrote: Sun Jun 19, 2022 3:06 am Think I can show this without being called a copy cat by someone.
Nice. What are you doing for a pickup tube spacer.

Edit: Forgot picture…

(Oh, BTW, if you want to post a bunch of pictures, this site’s thread navigation and pagination work better when it’s one to three pictures per post.)



Image
By h2pmr
Registration Days Posts
#160739
Crumpler wrote:Image
Image
water cooled intercooler?
You do not have the required permissions to view the files attached to this post.
By Crumpler
Registration Days Posts
#160800
Bingo Phil :)

It’s a small core but the only place I could get an intercooler to fit. The centrifugal SC was heat soaking badly.
By worf
Registration Days Posts Custom
#160862
XR4Tim wrote: Thu Jul 14, 2022 10:56 pm ... pic ...
NOS right-side parcel shelf?


Image
By worf
Registration Days Posts Custom
#163875
Quiz:

Image
By h2pmr
Registration Days Posts
#163966
no need to get the apprentice to try and make some out of a cut off bolt head, i have a few spare if you need any :thumbup:
other than that i am out of ideas :surrender:
cheers
Phil
You do not have the required permissions to view the files attached to this post.
By worf
Registration Days Posts Custom
#164394
@Rdon Your picture: $1000 of pain.

Rdon wrote: Tue Aug 02, 2022 5:09 pm “Flappy valve” stop
Correct!

Image
Mrmerlin liked this
By Rdon
Registration Days Posts Custom
#164452
worf wrote: Thu Aug 04, 2022 7:54 pm @Rdon Your picture: $1000 of pain.


Fortunately, the pump is operational. Removed it specifically to check for a broken hose and was not disappointed. No drama with the threaded insert, replacement hose and clamps installed and now, theoretically, one less thing that could leave me on the side of the road.
Image
Image
Crumpler liked this
By Strosek Ultra
Registration Days Posts
#168123
Image
Things does not always go well. In this case fabricating a new wrist pin bushing is all what was needed except for a new wrist pin.
Åke
By h2pmr
Registration Days Posts
#168126
Strosek Ultra wrote:Image
Things does not always go well. In this case fabricating a new wrist pin bushing is all what was needed except for a new wrist pin.
Åke[/quote

interested to know more about what happened to that wrist pin
cheers
Phil
You do not have the required permissions to view the files attached to this post.
By h2pmr
Registration Days Posts
#168239
/\ /\ /\ /\
so i guess he's not perfect after all
cheers
Phil
You do not have the required permissions to view the files attached to this post.
By Strosek Ultra
Registration Days Posts
#168240
h2pmr wrote: Sun Aug 28, 2022 4:42 am /\ /\ /\ /\
so i guess he's not perfect after all
cheers
Phil
Nobody is perfect. I do not know how involved he was in this disaster.
You can read more here (page 7).
https://www.corner-carvers.com/forums/s ... ing-thread
Åke
Image
By h2pmr
Registration Days Posts
#168266
Strosek Ultra wrote:
h2pmr wrote: Sun Aug 28, 2022 4:42 am /\ /\ /\ /\
so i guess he's not perfect after all
cheers
Phil
Nobody is perfect. I do not know how involved he was in this disaster.
You can read more here (page 7).
https://www.corner-carvers.com/forums/s ... ing-thread
Åke
Image
thanks for the thread link, i thought it was a recent, road car engine failure but still sadly 1 less useable engine block in the world.
cheers
Phil
You do not have the required permissions to view the files attached to this post.
By h2pmr
Registration Days Posts
#169424
before i get my micrometer out, does anybody know what size bearing or generic part number of it, that fits in the A/C compressor front pulley?
compressor is the 80-89 version.
cheers
Phil
You do not have the required permissions to view the files attached to this post.
By Strosek Ultra
Registration Days Posts
#169507
image.png
This bearing is a double row angular contact ball bearing. This bearing is usually used in AC compressor / compressors on vehicles, where by the additional names as AC bearing and Kompressor bearing.
FULL DESIGNATION: AC 35x55x20
( d ) INNER DIAMETER: 35 mm
( D ) OUTER DIAMETER: 55 mm
( B ) WIDTH: 20 mm
Åke
You do not have the required permissions to view the files attached to this post.
By h2pmr
Registration Days Posts
#169509
Strosek Ultra wrote:
image.png
This bearing is a double row angular contact ball bearing. This bearing is usually used in AC compressor / compressors on vehicles, where by the additional names as AC bearing and Kompressor bearing.
FULL DESIGNATION: AC 35x55x20
( d ) INNER DIAMETER: 35 mm
( D ) OUTER DIAMETER: 55 mm
( B ) WIDTH: 20 mm
Åke
perfect, many thanks Ake :thumbup:
Image
By h2pmr
Registration Days Posts
#170462
Strosek Ultra wrote: This bearing is a double row angular contact ball bearing. This bearing is usually used in AC compressor / compressors on vehicles, where by the additional names as AC bearing and Kompressor bearing.
FULL DESIGNATION: AC 35x55x20
( d ) INNER DIAMETER: 35 mm
( D ) OUTER DIAMETER: 55 mm
( B ) WIDTH: 20 mm
Åke
sadly the 80-89 A/C compressor use a bearing 40 x 62 x 24, not quite as easy to find though
Image
By h2pmr
Registration Days Posts
#170481
i think part number of the bearing is 40BG62020-2DLCS, will order 1 and see if it fits.
cheers
Phil
You do not have the required permissions to view the files attached to this post.
By Bertrand Daoust
Registration Days Posts
#170522
A 928 meet today in Montréal.
Thanks Andy!
A lot of fun with great owners.
And two very special guests!
Image
Image
Image
Image
amdavid liked this
By Strosek Ultra
Registration Days Posts
#170572
h2pmr wrote: Sat Sep 10, 2022 1:21 pm i think part number of the bearing is 40BG62020-2DLCS, will order 1 and see if it fits.
cheers
Phil
The bearing you need is called 40BD219.
Can be found on Ebay or here https://www.bearingwholesalelots.com/40 ... on-com.htm
The bearing you mentioned is 20,6mm wide.
Åke
https://www.ebay.com/itm/192305821780?h ... BMhJDStOVg
image.png
You do not have the required permissions to view the files attached to this post.
By h2pmr
Registration Days Posts
#170607
Strosek Ultra wrote:
h2pmr wrote: Sat Sep 10, 2022 1:21 pm i think part number of the bearing is 40BG62020-2DLCS, will order 1 and see if it fits.
cheers
Phil
The bearing you need is called 40BD219.
Can be found on Ebay or here https://www.bearingwholesalelots.com/40 ... on-com.htm
The bearing you mentioned is 20,6mm wide.
Åke
https://www.ebay.com/itm/192305821780?h ... BMhJDStOVg
image.png
ah yes, managed to cancel that one and get one the correct size, thank you Ake.
You do not have the required permissions to view the files attached to this post.
By SeanR
Registration Days Posts Custom
#170749
30 sets are ready to ship. Sorry for the wait boys and girls.
image.png
You do not have the required permissions to view the files attached to this post.
By h2pmr
Registration Days Posts
#171573
Strosek Ultra wrote:
h2pmr wrote: Sat Sep 10, 2022 1:21 pm i think part number of the bearing is 40BG62020-2DLCS, will order 1 and see if it fits.
cheers
Phil
The bearing you need is called 40BD219.
Can be found on Ebay or here https://www.bearingwholesalelots.com/40 ... on-com.htm
The bearing you mentioned is 20,6mm wide.
Åke
https://www.ebay.com/itm/192305821780?h ... BMhJDStOVg
fitted the bearing yesterday and fits like a glove, many thanks.
Image
Strosek Ultra liked this
By h2pmr
Registration Days Posts
#171718
lack of use in the UK
You do not have the required permissions to view the files attached to this post.
By h2pmr
Registration Days Posts
#171720
N/A to auto owners
You do not have the required permissions to view the files attached to this post.
By h2pmr
Registration Days Posts
#171722
more slightly unsafe corrosion
You do not have the required permissions to view the files attached to this post.
By worf
Registration Days Posts Custom
#171761
Stay in your grove you mutha!@#$ing gasket!

When you get a cam cover gasket that was rolled into a little ball for shipping:

Image
By worf
Registration Days Posts Custom
#172930
928 Frenzy. Last Saturday.

Image
  • 1
  • 10
  • 11
  • 12
  • 13
  • 14
  • 17
Formula 1 2020 And Beyond

Congrats to Lando. RB's not working too well in Mi[…]

my #3 restoration thread

had a look at it this morning Dave, and when i had[…]

Racing garments

Let me call my son ~ you can never have too many […]

Rear Brake line Seized

Now I will need to pass the new right line over […]