For shits and giggles, I drew this up so it can be 3d printed. Download the file attached.
i am not a traitor wrote: ↑Thu Sep 02, 2021 9:53 am For shits and giggles, I drew this up so it can be 3d printed. Download the file attached.Thanks for uploading!
996 GT2 Bumper Spacer.stl
- By worf
For what it is worth, only the rear Yokes are Po[…]
Gary, been reading a little in the wiring primer. […]
- By worf
Plan would be a light coat under the nut, a well[…]
- By Sazerac