8 cylinder front engine iconic vehicle
  • User avatar
  • User avatar
  • User avatar
  • User avatar
By Fadec
Are these springs on backwards? I’m thinking the longer spring, the one they have up front, goes on the adjuster
You do not have the required permissions to view the files attached to this post.
User avatar
By worf
Those -^ are correct.

I know it seems weird.
User avatar
By ChrisZ
Right, remember the short spring presses against the adjuster and keeps it from moving around by itself. When you turn it with a screwdriver it snaps against the spring to the next tooth.
User avatar
By Mrmerlin
now that you have these figured out get a mirror and flashlight and verify the shoe anchor springs are properly fastened
look on the back of the hub carrier for a rib that faces forward,
the spring should hook it. common for these to not be properly hooked,
thus a short while later it sounds like loose parts in the hub

Well I have finally got around to fitting the Hans[…]

Replacing Acceleration Cable

don't throw the old cable away.

Great work as always! :thumbup:

To quote Frank from Everyone Loves Raymond “[…]