Angle of entry

Reply

Angle of entry#61559

By maddog2020 - Mon Feb 22, 2021 5:23 pm

- Mon Feb 22, 2021 5:23 pm #61559

Does anyone know what the angle of entry is for the 928 on driveways? We are looking at a home that has a steep driveway downward into the garage.

Re: Angle of entry#61652

By worf - Mon Feb 22, 2021 8:48 pm

- Mon Feb 22, 2021 8:48 pm #61652

maddog2020 wrote: ↑Mon Feb 22, 2021 5:23 pm Does anyone know what the angle of entry is for the 928 on driveways? We are looking at a home that has a steep driveway downward into the garage.

This isn't the answer your looking for...

... but since it's ride height dependent doesn't it make sense to measure your 928 as it sits?

If yours isn't 'sitting' then give me a ballparky ride height and I might be able to measure one of the three I have that are sitting right now.

Hanlon’s Razor: Never attribute to malice that which is adequately explained by stupidity.
Heinlein’s Corollary: Never underestimate the power of human stupidity.
The Reddit Conjecture: Sufficiently advanced stupidity is indistinguishable from malice.
Worf’s Razor: Never attribute to stupidity that which is adequately explained by laziness.
Worf’s Identity: Sufficiently advanced laziness is indistinguishable from stupidity
Worf's Law: Once you've mitigated risk from stupidity and laziness in your endeavors, failure is usually the result of insufficient imagination.

My 928 Inspection Guide

Re: Angle of entry#61654

By maddog2020 - Mon Feb 22, 2021 8:59 pm

- Mon Feb 22, 2021 8:59 pm #61654

mines hanging right now... lol as usual. I'm running 265/35/18 with a diameter of 25.4" I don't have the ride height set yet but my plan was to take the standard height and add half the diameter increase to keep all of the suspension geometry optimum.

Re: Angle of entry#61734

By Geza-aka-Zombo - Tue Feb 23, 2021 7:42 am

- Tue Feb 23, 2021 7:42 am #61734

Measured mine and am getting 11.5 deg. max. Stock wheels/tires/ride height. Center of the black part of the front fascia makes contact. Pic showing area I'm talking about.

A lot better than the GT350 (7 deg.) which scrapes everywhere.

Geza
'87 Porsche 928 S4 Auto (3rd owner)
Original owner of:
'97 Porsche 986 5 Speed
'99.5 Audi A4 Avant 2.8 5 Speed
'16 Ford GT350 Track Pack

Re: Angle of entry#61781

By worf - Tue Feb 23, 2021 10:46 am

- Tue Feb 23, 2021 10:46 am #61781

Geza-aka-Zombo wrote: ↑Tue Feb 23, 2021 7:42 am Measured mine...

The picture with the wheels dangling begs for questions to be asked.

Was the suspension settled when you did the approach angle measurement?

Hanlon’s Razor: Never attribute to malice that which is adequately explained by stupidity.
Heinlein’s Corollary: Never underestimate the power of human stupidity.
The Reddit Conjecture: Sufficiently advanced stupidity is indistinguishable from malice.
Worf’s Razor: Never attribute to stupidity that which is adequately explained by laziness.
Worf’s Identity: Sufficiently advanced laziness is indistinguishable from stupidity
Worf's Law: Once you've mitigated risk from stupidity and laziness in your endeavors, failure is usually the result of insufficient imagination.

My 928 Inspection Guide

Re: Angle of entry#61804

By Geza-aka-Zombo - Tue Feb 23, 2021 11:41 am

- Tue Feb 23, 2021 11:41 am #61804

Yes, car has been sitting. That was just a older picture I pulled so I can point to the location that would hit first.

Geza
'87 Porsche 928 S4 Auto (3rd owner)
Original owner of:
'97 Porsche 986 5 Speed
'99.5 Audi A4 Avant 2.8 5 Speed
'16 Ford GT350 Track Pack

Reply

Page 1 of 1
6 posts

Angle of entry#61559

Re: Angle of entry#61652

Re: Angle of entry#61654

Re: Angle of entry#61734

Re: Angle of entry#61781

Re: Angle of entry#61804

993 Forum

What a day, blew starter on 928.

Replacing the hood hinges, how hard (I hate mechanics)

Can Ignition Control Unit (k-jet tsz) be assessed visually?