By SeanR - Fri Feb 05, 2021 4:57 pm
- Fri Feb 05, 2021 4:57 pm
#57214
This is off an '82 that I took on as a project, customer had been waiting a good long while and finally said okay.
When this is coming out of the tank, you know everything needs going through. Tank flushed, strainer/seal/pump/hoses/filter etc all new.
Fuel hoses, feed and return.
Then the injector rails came out and this is where it gets real fun. Take a look both pictures and tell me what you see has been done and what wasn't.
Hope I can wake these injectors back up and I have zero hope that the FPR/Dampers are any good.
When this is coming out of the tank, you know everything needs going through. Tank flushed, strainer/seal/pump/hoses/filter etc all new.
Fuel hoses, feed and return.
Then the injector rails came out and this is where it gets real fun. Take a look both pictures and tell me what you see has been done and what wasn't.
Hope I can wake these injectors back up and I have zero hope that the FPR/Dampers are any good.
You do not have the required permissions to view the files attached to this post.
Formerly SeanR on RL
https://www.facebook.com/groups/1514018128869499/
https://www.facebook.com/groups/1514018128869499/